580 S : Round Bale Wrapper : Tanco Autowrap

The 580 S round bale wrapper is a compact, robust machine suitable for farmers and contractors. It is the most efficient and effective trailed round bale wrapper on the market.

This agricultural wrapping machine includes a semi automatic, three lever joystick control. By simply holding the rotation lever for one revolution, the 580 S will automatically run through the entire pre-selected number of rotations and stop in the off-loading position. This is the tried and tested wrapping system that produces quality forage with good output at the right cost.

An adjustable hydraulic valve allows the lowering speed of the hydraulic bale ramp to be changed for different weight bales. The end tip ramp and wide low pressure ground tyres are optional extras.

Features

Trailed round bale wrapper
RDS bale counter
Semi-automatic joystick control
End tip kit - optional
Dual stretch dispenser (70% & 55%)
Film roll holders
Film changeover
Film adaptor - optional
Bale stop roller
Extendable axle
Full width belt
Hydraulic cut & start
Autostop
Turntable support rollers
Dispenser gears (33%) - optional
Adjustable self loading arm
Hydraulic offloading ramp flow control (suitable for all conditions)
Wide low pressure tyres - optional
Closed centre plug – optional
Closed centre tap plug (on/off) - optional

Technical Specifications

Transport

Length (m)	5.4
Width (m)	2.43
Height(m)	2.43
Weight unladen (kgs)	1385

Operation

Min oil requirement (l.p.m.)	25
Table speed (rpm)	30
Film width (mm)	500 / 750
Attachment to tractor	Trailed
Hydraulic connections	2 x 1/2
Electrical requirement	12v
Road speed	40 km/h

Round Bale Sizes

Max. width (m)	1.2
Max. diameter (m)	1.2 - 1.5
Max. weight (kgs)	1000

Equipment

Standard Equipment

RDS Bale Counter
The counter calculates the number of revolutions and the cycle finishes after tipping.

Joystick Control
The joystick allows semi-automatic control of the bale wrapper.

Dual Stretch Dispenser
Aluminium dispenser maintains consistent stretch as well as allowing a quick changeover of stretch levels from 55% to 70%.

Film Roll Holders
Additional film rolls can be stored and transported on the bale wrapper.

Film Changeover
Film rolls can be easily loaded into dispenser unit with unique locking mechanism, saving time and effort.

Bale Stop Roller
This acts as a bale stop when loading. During wrapping, this ensures the bale stays in the same position when being rotated.

Extendable Axle
Trailed wrappers have an extendable axle that eliminates the need for counterbalance weights.

Full Width Belt
Full width belt ensures uneven bales are properly supported and given an even rotation and wrap. Also minimises loose grass falling down to central spindle.

Cut & Start
Hydraulic cut & start unit holds the film at the beginning of the wrapping cycle and cuts it at the end.

Autostop
The bale wrapper runs through the wrapping cycle and automatically finishes after a set number of rotations, ready for off loading.

Turntable Support Rollers
Turntable supported by four rollers which disperse the weight of the bales over the entire machine, dramatically increasing the lifetime of the machine.

Loading Arm
For easy loading of silage bales. Can be set for different diameter bales.

Video

Gallery

		280 ARC The stand alone 280 ARC round bale wrapper is fully automatic via radio remote control. It can be powered by a tractor or power pack. An independent power pack can be fitted directly onto...
		580 A The 580 A round bale wrapper is a compact, robust machine suitable for farmers and contractors. This agricultural wrapping machine has an electronic control box mounted in the tractor cab controlling...
		1300 S The 1300 S rear-linked round bale wrapper is robustly built, but still only weighs 655 kgs, making it suitable for most tractors and material handling machines. High performance, low maintenance,...
		1300 SM The 1300 SM rear-linked round bale wrapper is robustly built, but still only weighs 655 kgs, making it suitable for most tractors and material handling machines. This agricultural wrapping machine...
		1300 EH The 1300 EH rear-linked or loader mounted round bale wrapper is robustly built, but still only weighs 655 kgs, making it suitable for most tractors and material handling machines. The wrapper...
		1514 T The robust 1514 T bale wrapper is the most versatile of its kind, capable of wrapping both square and round silage bales. The machine has a unique roller system with two independently driven...
		404 EH The 404 EH is the only trailed mini square and round bale wrapper on the market. It dramatically speeds up the wrapping process by independently following the baler in the field. A hydraulic...
		1804 S The 1804 S is an extremely compact and efficient square and round bale wrapper. It is ideal for contractors who wish to wrap at the point of stacking. The stand alone machine...
		1400 EH The 1400 EH high speed, trailed round bale wrapper has a unique loading and unloading system, along with a superior wrapping process delivering consistent bale wrapping in all conditions.
		1320 EH The 1320 EH is the latest model in the 1300 bale wrapper series. It retains the high performance, low maintenance, compact size, and versatility that have made the 1300 bale wrapper so popular...
		1814 The 1814 LA high speed, trailed, square and round bale wrapper is the ultimate choice for bale wrapping contractors. For high output, ease of use, consistent performance and versatility, this...
		1514 S The robust 1514 S bale wrapper is the most versatile of its kind, capable of wrapping both square and round silage bales. The machine has a unique roller system with two independently driven rollers...

580 S