Tanco - Bale Wrapper Specialist

1814 S

The 1814 S is an extremely compact and efficient square and round bale wrapper.  It is ideal for contractors who wish to wrap at the point of stacking.  

The stand alone machine has a twin bale wrap sequence.  The wrapper is fully automatic and can be operated via radio remote control from the tractor cab.  While wrapping, the operator can stack wrapped silage bales and prepare loading the next bale.

This agricultural wrapping machine is also very versatile.  The bale wrapper has hydraulically adjustable rollers which can be quickly changed to fit bale sizes of 0.6 to 1.4 meters in height to a maximum of 2 meters in length.  The height levels are also independently hydraulically adjustable at the front and rear to ensure a sturdy position.

The 1814 S is fitted with a 20 horse power Kubota diesel engine and oil cooler kit as standard.

 

Features

    • RDS Expert Controller
    • Radio Remote Control Unit
    • Film Break Sensor - optional
    • Rock & Roll System
    • Speed Control Valve
    • Autostop
    • Dual Stretch Dispenser
    • Film Adaptor - optional
    • Film Changeover
    • Film Roll Holders
    • Cut & Start
    • Cut & Start (Two) - optional
    • Twin Dispenser - optional
    • Twin Tower Support
    • Bale Drop Mat
    • Dispenser Gears (33%) - optional
    • Wide Low Pressure Tyres
    • Kubota 20 h.p. Engine
    • Oil Cooler Kit

Technical Specifications

Transport

  • Length (m)
  • 4.8
  • Width (m)
  • 2.4
  • Height(m)
  • 3
  • Weight unladen (kgs)
  • 3425

Operation

  • Min oil requirement (l.p.m.)
  • 35
  • Table speed (rpm)
  • 25 (Arm Speed)
  • Film width (mm)
  • 750 / 500
  • Attachment to tractor
  • Static
  • Hydraulic connections
  • -
  • Electrical requirement
  • -
  • Road speed
  • 40 km/h

Round Bale Sizes

  • Max. width (m)
  • 1.2
  • Max. diameter (m)
  • 1.2 - 1.5
  • Max. weight (kgs)
  • 1000

Square Bale Sizes

  • Max. width (m)
  • 0.8 - 1.2
  • Max. length (m)
  • 2
  • Max. height (m)
  • 0.47 - 1.4
  • Max. weight (kgs)
  • 1000

Equipment

RDS Expert Controller

RDS Expert Series allows full automation of bale wrapper as all functions are controlled through electro-hydraulic valves.

Radio Remote Control Unit

The new handheld radio remote control kit only requires the operator to be within 50 meters of the wrapper.

Rock & Roll System

Unique system for ensuring a consistent rotation of square bales for an excellent overlapping of strech wrap.

Speed Control Valve
The control valve allows the operator to adjust the speed of the satellite arm ensuring an accurate overlap.

Autostop
The bale wrapper runs through the wrapping cycle and automatically finishes after a set number of rotations, ready for off loading.

Rotate After Wrap Arm
Once the bale is wrapped the bale can be rotated (length of rotation time set by operator).  Eliminates any gathering of loose film.

Dual Stretch Dispenser
Aluminium dispenser maintains consistent stretch as well as allowing a quick changeover of stretch levels from 55% to 70%.

Film Changeover
Film rolls can be easily loaded into dispenser unit with unique locking mechanism, saving time and effort.

Film Roll Holders
Additional film rolls can be stored and transported on the bale wrapper.

Cut & Start
Hydraulic cut & start unit holds the film at the beginning of the wrapping cycle and cuts it at the end.

Twin Tower Support
Two tubular tower masts gives maximum strength and ensures the long life of the wrapper.

Bale Drop Mat
The silage bale is tipped off wrapper and drops onto this protective mat.

Wide Low Pressure Tyres
Reduces rolling resistance. Gives larger contact area with the soil, spreading the load over a bigger area.

Kubota 20 h.p. Engine
Three cylinder, vertical water-cooled diesel engine. Self-contained, electric start.

Oil Cooler Kit
Thermostatically controlled oil cooler.

Optional Equipment

Film Break Sensor
In the event of a roll of film running out of plastic or breaking during the wrapping cycle, the operator is automatically alerted.  On bale wrappers with two rolls of film, the wrapping cycle speed is automatically reduced when one roll is still operational, ensuring the correct overlap and allowing the operator to finish the cycle until the plastic roll is replaced.  The electronic controller will resume where it left off in the event the operator needs to change the plastic roll during the wrapping cycle.     

Film Adaptor
Extension for using 500mm plastic. 

Cut & Start (Two)
Hydraulic cut & start units mounted individually on two drop down arms on both sides of the wrapper.  These fold in for transport position.
 
Twin Dispenser
Two rolls of film being applied automatically at same time.

Dispenser Gears (33%)
Dispenser gears to allow 33% stretch level.

 

Video

Select & Compare

Compare this product with two others.

  • AUTOWRAP S100 STATIC AUTOWRAP S100 STATIC

    Static Wrapping is considered to be the most reliable and best method, as bales are handled to a minimum after 
wrapping. The AutoWrap S100 Static wrapper ensures that a quality wrap is applied...

  • AUTOWRAP L100 AUTOWRAP L100

    AutoWrap L- SERIES


    The L- Series is an entirely new wrapping system developed by Tanco to eliminate outdated and costly trailed wrapper techniques.

  • AUTOWRAP OFF-SET KIT AUTOWRAP OFF-SET KIT

    AutoWrap L-Series haS the option of adding an Off-Set (O/S) Kit. The O/S Kit is simply attached to the AutoWrap L- Series Wrapper converting the 3pt linkage machine into a versatile trailed...

  • VARIWRAP S200 VARIWRAP S200

    Productivity Delivered


    The Tanco VariWrap System is our most advanced and versatile wrapping system to date. Incorporating 25 years
    of experience...

  • 1530 EH 1530 EH

    The robust 1530 EH bale wrapper is the most versatile of its kind, capable of wrapping both square and round silage bales.  The machine has a unique roller system with two independently driven...

  • 1540 EH 1540 EH

    The robust 1540 EH bale wrapper is the most versatile of its kind, capable of wrapping both square and round silage bales.  The machine has a unique roller system with two independently driven...

  • 404 EH 404 EH

    The 404 EH is the only trailed mini square and round bale wrapper on the market.  It dramatically speeds up the wrapping process by independently following the baler in the field.  A hydraulic...

  • AUTOWRAP S100 AUTOWRAP S100

    Affordable Quality
    The AutoWrap is directed toward Semi-Professional and Individual Operators who require the Quality and Reliability
    expected of a Tanco wrapper. The AutoWrap...

  • VARIWRAP S300 VARIWRAP S300

    Productivity Delivered
    The Tanco VariWrap System is our most advanced and versatile wrapping system to date. Incorporating 25 years of experience the VariWrap System delivers the...

  • VARIWRAP L200 VARIWRAP L200

    L- SERIES
    The Tanco L- Series is an entirely new wrapping system developed by Tanco to eliminate outdated and costly trailed wrapper techniques.

    The L- Series, with its...

  • VARIWRAP L300 VARIWRAP L300

    L- SERIES


    The Tanco L- Series is an entirely new wrapping system developed by Tanco to eliminate outdated and costly trailed wrapper techniques.

  • ADMIN ADMIN

    ADMIN

  • VARIWRAP OFF-SET KIT VARIWRAP OFF-SET KIT

    The VariWrap L-Series both have the option of adding an Off -Set Kit.

    The off -Set Kit is simply attached to the L- Series Wrapper converting the 3pt linkage machine into a versatile trailed...

  • Compare this product with two others.

    1814 S

    Model

  • Series:
  • 1814 S
  • Type:
  • Square Bale Wrapper
  • Model Number:
  • 1814 S
  • Mounting:
  • Static
  • Download 1814 S Brochure